Production, repair and restoration of kitchen furniture in Moscow and the Moscow region

offers a full cycle of work on the production, repair and restoration of kitchen furniture. We have been working in Moscow and the Moscow region for 10 years, during which we have managed to accumulate valuable experience and consolidate our reputation as a reliable performer. Custom kitchens, replacement of kitchen facades, replacement of kitchen countertops, restoration of kitchen facades, restoration of kitchen furniture are the most frequently ordered services.

We will help transform your home taking into account your preferences, room characteristics, budget and based on current trends in the field of furniture production and design. Do not delay updating or repairing your furniture, contact us and get detailed advice from our specialists.

Give your kitchen a second life!

Reasons for restoring kitchen facades

If your kitchen generally copes with its functions, but you notice that:

the color of the facade has faded or faded;
the protective film peels off;
the surface of the facades was cracked and covered with stains;
want to change the kitchen design or color scheme,
your kitchen without a doubt needs restoration services, which will be performed with high quality by the masters of our company.

Our specialists carry out the following list of works on the restoration of kitchen facades in Moscow and the Moscow region:

restoration of façade coverings;
priming and painting of facades;
replacement of inserts in the frame facade;
replacement of the facade frame;
varnishing of facades;
covering facades with film;
removing scratches and chips from the surface of facades;
fastening of facades.

Repair methods

The specificity of breakdowns of kitchen units consists in a large number of options for solving the problem. Furniture repair can be carried out in various ways. The choice of a specific one depends on the nature of the problem, its scale, materials and other factors, so the first action should be a careful inspection of the item, determining the degree of complexity of the upcoming work.

You should decide how you will repair kitchen furniture yourself, make yourself a list of the necessary tools and materials. All preparatory work should be considered the first stage, which cannot be neglected. Haste in such things only delays the process, since you often have to correct defects and redo the work all over again. It is convenient to combine furniture restoration with general kitchen renovation, as this will greatly simplify the task. Some procedures can be dusty and dirty, so it is recommended to immediately carry out a complete renovation of the room.

Reasons for the popularity of magic corners for the kitchen, selection criteria

Existing breakdowns of kitchen furniture can be divided into three groups:

restoration of the appearance of the facade;
repair or replacement of a door (or all doors at once, if necessary);
restoration, replacement of a dining table or tabletop set.

All these actions represent different problems that must be solved using appropriate methods. There is no universal way to work with kitchen furniture, so each type of repair should be discussed separately.

Façade restoration

Replacing the countertop

Door repair

Restoration or replacement of facades

The facade of the kitchen set is the entire visible part of the furniture, which is also complemented by the countertop. By its condition one can judge the quality and age of the entire set. The fact is that the facade of furniture in the kitchen experiences significant loads - from mechanical (mainly elements of the lower tier) to temperature and fat settlement (upper zone).

The main components of the furniture facade are doors. They can be made from different materials:

Chipboard. This is the most common option and is used in inexpensive kitchen sets.
MDF. A denser material that is relatively resistant to moisture.
Glass. Usually such elements are simply broken and soon replaced with new ones.
Solid wood. Such facades are available in expensive furniture sets. They are quite capricious, but to a greater extent they can be restored.

The most affordable repair option is a complete replacement of all elements of the frontal plane. Some sources recommend finding other furniture doors and installing them in place of the old ones. The advice is good, but difficult to implement - it is necessary that the new and old parts are exactly the same. The right decision would be to order the doors from a furniture manufacturing company.

laminated chipboard

Solid wood

Doors

The most common problems include failure of door hinges. They are loaded more heavily than all other elements and therefore require repairs much more often. Usually the doors are completely replaced, and this is done as follows:

old parts are removed from the headset;
unscrew the screws and remove the hinges;
mark the new elements, repeating the position of the loops on the old parts;
using a Forstner drill with a diameter of 35 mm, sockets for new hinges are made;
install the fasteners and hang the door on the set. In this case, the upper structures are fixed first, and then the lower elements.

If you do not plan to replace the door, you just need to strengthen the fittings. To do this, you need to remove the hinge, and in the places where the screws were attached, drill 2 holes - thinner and larger. The depth of the holes is about 10 mm. After this, you need to take a small wooden stick, make 2 chopsticks up to 10 mm out of it, coat them with glue. Repeat the last step with the holes made. Hammer the choppers into them. The next day, you need to make holes on them for self-tapping screws, then install and attach a loop.

There are many different designs of furniture hinges, but they all require the same socket size - a recess with a diameter of 35 mm. It is important not to overdo it so as not to drill through the door. To do this, it is useful to install a limiter or use a drilling machine, which will ensure that the front side is kept intact.

Unscrew the old hinges

We make markings for new loops

Screwing on new hinges

We hang the door and secure it

Countertop and dining table

Repairing countertops is a common need. The kitchen table performs many functions and experiences different types of loads. Hot containers are placed on it, and the surface is used for cutting food. Such exposure contributes to accelerated failure of the surface. The optimal solution to the problem is to replace the countertop. Purchasing a new product is an expensive undertaking, especially since the base often remains virtually untouched.

Options for kitchens without upper cabinets, photos of possible designs

Sequencing:

The old tabletop is removed from the base. Unscrew the screws or other connecting elements and separate the working plane.
Take measurements and purchase a new countertop.
Using the old surface as a template, make the necessary holes or recesses. All sockets and attachment points should be exactly repeated.
Place the new countertop in place.

The above procedure is suitable for products made from chipboard or MDF. For solid wood panels, a suitable option is to restore the surface by grinding followed by varnishing. For work, various machines are used - orbital or vibrating. When scratches or gouges are completely removed, the surface is varnished. It is recommended to use solid, moisture-proof varieties of the product.

Dismantling the old surface

Marking under the sink

Installing a new countertop, cutting a hole for the sink

Restoration of painted facades

Enamel restoration is a fairly popular service. We carry out a whole range of works related to the restoration of painted facades, including: matte painting of facades, glossy painting of facades, application of a protective composition, decoration, patination, gilding of facades.

Facade restoration price

№	Restoration	Qty	Price
1	Removing the old layer	1m2	500 rub
2	Applying a layer of soil	1m2	1000 rub
3	Applying a layer of enamel	1m2	1300 rub.
4	Applying a layer of varnish	1m2	1100 rub.
5	Applying a layer of stain	1m2	1400 rub.
6	Applying patina elements	1m2	1800 rub.

№	Painting	Qty	Price
1	Painting the back side of the facades (glossy enamel)	1m2	4750 rub.
2	Painting the back side of the facades (matte enamel)	1m2	2350 rub.
3	Metallic paint RAL	1m2	5750 rub.
4	Matte enamel for curved and framed facades	1m2	3000 rub
5	Matte enamel	1m2	2450 rub.
6	Glossy enamel RAL	1m2	4950 RUR

We strongly recommend that you check the cost of services and materials with our managers.

Coloring

Restoring kitchen facades using painting is the second most popular method. It is worth noting that it is far from being as simple as it seems at first glance. All facades are painted with the exception of MDF doors with acrylic panels.

Polyurethane enamels are preferable among kitchen materials. They are resistant to moisture and temperature changes, are not afraid of light, dry quickly and are safe. In addition, the palette of paints includes all kinds of shades and textures - from matte to high-gloss, literally with a mirror shine.

How to restore a kitchen set by painting?

Remove all the fittings from the sashes, then remove the facades themselves.
The finishing layer is completely removed and the surface is cleaned with sandpaper.
The material is primed - it is recommended to use a water-based polyurethane primer. The procedure should be repeated and wait for the primer to dry completely.
Apply paint using a roller and brushes of different sizes. The paint must be applied in several layers, first allowing each layer to dry completely. The carved parts of the product are especially carefully painted. Using a stencil, you can create a pattern, ornament or image on the sash.
When restoring the facade, do not forget about the final stage - varnishing. No matter how good the enamel is, varnish will prevent its mechanical damage.

Coloring techniques are different. Depending on your own skill, you can simply paint the facade with one color, you can paint it, you can paint the kitchen set with “metallic” paint - it contains aluminum powder.

The fashionable aging effect is obtained in this way: the facade is covered in two layers with paint of different shades, and after drying, a solvent is applied to the surface. In this case, the top layer becomes covered with cracks. With the right skill, you can also achieve a “chameleon” effect: this will also require painting in two colors, but after drying, the facades are coated with glossy varnish.

How to order restoration of facades in Moscow and Moscow Region?

It's no secret that a complete change of furniture has a disastrous effect on the family budget. However, if you want to bring life back to your kitchen set and save money at the same time, the kitchen facade restoration service performed by our professional craftsmen is suitable for you. Our clients choose us because we:

We carry out all work on time;
We offer affordable prices;
we guarantee quality;
We use only the highest quality and safest materials;
We help with the selection of materials and components;
We work on special equipment.

To place an order you only need to complete a few simple steps:

Call us or send a request.
At the agreed time, a surveyor will come to you, with whom you can discuss all the conditions.
The order is executed efficiently and on time.
You accept the work and pay for the order.

High-quality restoration of kitchen facades in Moscow and the Moscow region. All work, as a rule, is performed on site without the need to travel to the workshop. We take on urgent and complex orders. Don't hesitate to call and your updated kitchen will serve you for many years.

Partners

Manufacturers of fittings and countertops that we trust and recommend to our clients:

One of the leaders in the production of furniture accessories. In addition to 7 factories in Austria, BLUM has production facilities in the USA and Brazil. About 5 thousand employees around the world ensure the highest quality of products, which pleases our customers throughout the entire life of the furniture.

Hettich is one of the largest manufacturers of furniture fittings. Every day, more than 6 thousand company employees invest their knowledge, experience and labor in the development of smart furniture technology. The company is located in Germany, the city of Kirchlengern. All over the world, the Hettich brand is associated with quality, innovation and reliability.

From a small Polish company, GTV has gradually grown into an international manufacturer of world-class furniture accessories. Over the past years, they have opened their branches in the Czech Republic, Croatia, Russia and Brazil. GTV operates in 40 markets in Asia, Europe, America and Africa.

Kesseböhmer is a recognized leader in this market. Founded in 1954. Customer focus has helped the company achieve and maintain its position as a leading supplier of functional kitchen fittings. Kesseböhmer stands for innovative solutions and a powerful combination of design, functionality and quality.

HÄFELE is an international furniture fittings company with its head office in Nagold, Germany. The competence and efficiency of the Häfele Group is valued by clients all over the world: representatives of the furniture industry, trade and craft production.

The EGGER Group, with its headquarters in Tyrol, Austria, is one of the leading producers of wood-based materials in Europe. The brand combines a wide range of products intended for the production of furniture, interior and exterior home decoration.

Duropal is a world leader in the production of decorative laminates. The company has been actively developing since 1958, constantly modernizing its production and introducing new technologies. Today the company employs more than 6,000 employees who service 22 factories.

founded in 1998 in Rostov-on-Don, specializes in the trade of furniture fittings and components for the production of functional and high-quality furniture. The company's core business is the production of countertops based on high-quality chipboard.

The Soyuz Industrial Group is the only company on the Russian furniture market that sells a full range of furniture components necessary for the production of cabinet furniture that meet modern European standards. The group includes a number of manufacturing enterprises and regional trading houses.

The SKIF factory was founded in 1997 and became the first and only serial manufacturer of countertops in Russia. Thanks to the high quality of its products and attentive attitude to the wishes of its consumers, the SKIF factory has taken a leading position in the market of components for furniture and construction.

How we are working

Call

Call or leave a request. The manager advises you and fills out an application.

Execution of work

The master arrives and performs the necessary work.

Acceptance of works

You check the quality of work performed.

Payment

You pay the master.

Unusual solutions

The imagination of home craftsmen literally has no limits, so completely unexpected things can serve as materials for kitchen renovation.

Photo wallpaper is a material that is in no way inferior to PVC film in terms of density and strength. It is fixed to the surface of chipboard, MDF and even plastic with liquid nails. Photo wallpapers are cut to the size of the facades and pasted in the most usual way. After the glue has dried, the products must be opened with varnish. If desired, you can order photo wallpapers with images from your personal archive.
Tile finishing. As a rule, walls are decorated with ceramics. However, nothing prevents you from using this beautiful material as decoration for a flat or paneled facade. The tiles are cut and fixed using the same liquid nails.
An even more interesting, but also labor-intensive option is porcelain mosaic. There are not enough broken dishes from one apartment for this, so you will have to get the fragments somewhere: if you negotiate with the nearest cafes and restaurants, you will get the material quite quickly. The fragments are sorted by color, used to form a pattern or simply a color gradient and glued to the surface of the facade. The gaps between the fragments are sealed with grout.

Restoring kitchen furniture should first of all restore functionality. However, the process is creative and exciting, so that as a result the kitchen can completely change its appearance.