Fiesta furniture / Upholstered furniture with a tick-tock mechanism

Design Features

If you plan to use upholstered furniture as a guest or permanent place to relax, you need to purchase a sofa with a transformation mechanism. The tick-tock sliding system has a rather complex design and is made of durable metal parts. To prevent frame distortions during transformation, the sofas are equipped with a synchronizing bar and a special spring.

To expand the structure using the pantograph mechanism, it is necessary to perform a series of sequential actions:

Raise the seat up using the attached hinges or holding the edge of the frame.
Pull the block towards you in a smooth motion, without much effort.
Extend the mobile support legs if the mechanism does not have a spring that automates the process.
Lower the backrest into the freed space, with the help of which the sofa unfolds and transforms into a flat sleeping place.

The presence of rubber pads on the legs of the sofa will protect the floor covering from mechanical damage.

The structure unfolds in almost two movements; no physical effort is required. Hence one of the names of the mechanism is “tick-tock”. The simplicity and ease of transformation make it possible to install such a model in a nursery, because the child will be able to independently prepare for bed.

Sofas with a tick-tock mechanism vary in shape, frame material, filling and have both pros and cons. Their main advantages:

convenient transformation;
strength of the folding system;
flat surface of a spacious place to rest;
maintaining the integrity of the floor covering;
possibility of installing furniture close to the wall;
the presence of a spacious drawer for storing linen.

the inconvenience of a seat that is too wide when folded;
the difficulty of repairing the pantograph mechanism for a sofa due to the large number of parts;
high cost of the model.

The “pantograph” (“tick-tock”) sofa transformation mechanism: its pros and cons

When choosing a sofa, many are lost due to the large number of different options and names. And it becomes unclear which sofa is best to buy so that it best meets the given requirements. To understand this issue, you should study information about transformation mechanisms, in particular, the “Pantograph”.

Features of the “Pantograph” transformation mechanism

The pantograph sofa is an improved version of the “Eurobook” familiar to many. The design is based on a hinge-rotation mechanism, the lower part of which is attached to the frame of the sofa, and the upper part to the movable part - the seat. The side links of the mechanism rotate 180°, as a result of which the seat and front legs of the sofa describe an arc in the air and land at some distance from the original position, freeing up access to the drawer and space for the second part of the bed mattress.

The transformation of the “Pantograph” sofa is carried out thanks to rotating mechanisms made of high-strength metal

Sometimes the mechanism is called “walking”. He seems to move from one position to another. “Pantograph” also has other names, for example, “Tick-tock” and “Puma”. Essentially, it's all the same mechanism. The only difference is in the name.

Types of pantograph sofas

Based on the Pantograph mechanism, different models of sofas are produced:

straight - the sofa seat is a single movable block;

A straight sofa bed does not take up much space and is well suited for small apartments
a straight sofa can consist of two blocks that fold out independently of each other;

A straight sofa with independent blocks can be folded out in parts
in the corner model, only part of the structure is folded out, complementing the fixed parts to create a full-fledged sleeping place;

Corner sofa provides plenty of space to relax during the day
A U-shaped sofa is a type of corner sofa, consisting of three parts, one or two of which are movable.

A sofa in the shape of the letter P will look good in a spacious room

The procedure for transforming “sofa-bed”

Folding out the sofa takes place in 2 steps, but we will look at the process in a little more detail:

Grasp the special loops or brackets located on the lower side of the seat with your hands.
Move upwards and towards yourself to activate the mechanism. The seat will rise above the sofa and move forward.

Raise the sofa seat by pulling it up and forward
Place the seat legs on the floor. In this position, access to the linen drawer is open.

Lower the seat to a new position
Lower the back of the sofa, turning it from a vertical position to a horizontal one.

Turn the back of the sofa
Read also: Everything you need to know before washing tulle in a machine
As a result of these simple steps, the sofa transforms into a bed.

The result is a double bed with a flat surface

The process of unfolding a sofa can be depicted schematically.

The pantograph sofa unfolds in two stages

And the bed can also easily be moved to the “sofa” position:

Raise the backrest to an upright position.
Raise the seat and push it towards the backrest.

Video: how the pantograph transformation mechanism works

Advantages and disadvantages of the design

The pantograph sofa, being a modern model, was designed taking into account errors in other models and has a number of advantages:

the mechanism is intended for daily use, easily transforms into the “bed” position and back;
The design of the sofa is durable and reliable. The sleeping place rests on the frame of the sofa and an additional bar (or legs) and can withstand a total weight of 240 kg, which distinguishes the “Pantograph” from other models, for example, French and American folding beds;
Unlike a number of models, the “Pantograph” has a spacious drawer for storing bed linen and blankets. That is, you don’t have to look for additional space for bedding;

The linen drawer will fit all bedding
Outwardly similar to the Eurobook, the pantograph sofa does not have roll-out rollers that can scratch the floor covering. The transformation mechanism also allows you to place the sofa on high-pile carpets;
the sofa can be moved to the wall, it moves forward and does not require a gap with other furniture;
the armrests of the sofa are not involved in the transformation. Sometimes manufacturers line them with wood, creating an original design. Or they increase the functionality of the model by making bedside tables with drawers or shelves instead of armrests.

A sofa with additional functions can be very comfortable

Identified deficiencies:

high price. All other things being equal (frame, upholstery, fittings), a pantograph sofa will cost more than other models;
The width of the bed is about 150 cm, which is quite enough for two people to sleep. However, some prefer a more spacious bed;
the sofa seat, on the contrary, is too wide and sitting on it, leaning on the back, is uncomfortable, especially for people of short stature. But manufacturers, as a rule, compensate for this shortcoming by equipping the sofa with additional pillows.

Cushions reduce the width of the sofa seat

Reviews

The pantograph sofa with armrests “Exotic” is comfortable and functional. The sleeping area is perfectly flat, quite elastic (I have problems with the spine, so this is very important for me), there are no indentations or other things at the joint, the mechanism is comfortable and strong, there is a drawer for linen. The idea with the armrests is simply great. They can be transformed in any way, and when the table or tables (since there are two of them) are not needed, then we move them to the place where the armrests should be. Takes up little space. Overall... great buy!

Olga Olegovna

https://otzovik.com/review_313185.html

When choosing a sofa, we took into account reliability and ease of unfolding. Found in Valencia's sofa. The mechanism for folding the sofa is called a pantograph - lifting up - towards you - down. A very convenient mechanism - it does not scratch the laminate, as in ordinary sofas when pulled out. The sofa is comfortable, there is a large sleeping area. No worse than a bed! In general, we are happy with the purchase.

natulek

https://otzovik.com/review_6985650.html

For six months now I have been delighted with the Kalambur-4M pantograph sofa from the Vikdol factory. The quality is top notch. When the question arose about choosing a sofa, I went to many stores in search of the most comfortable one, one of the criteria was the ease of opening the mechanism. The Pantograph walking mechanism is used here; I really liked it, as it does not damage the floor covering (as was previously the case with wheels). The seam between the back and the main berth when unfolded is not felt (there are no bumps or bends). The sleeping place itself is incredibly comfortable! The back relaxes and rests on it. But it is quite solid! Consists of: spring blocks, felt, polyurethane foam, batting, padding polyester and upholstery.

WannaBe

https://irecommend.ru/content/eto-samyi-luchshii-divan-foto

So, we looked at the principle of operation of the “pantograph” transformation mechanism, its pros and cons. Now you can decide whether it meets your needs.

Varieties and sizes

The tick-tock transformation system has several other names denoting the same mechanism:

“Pantograph” is the official name of the sliding mechanism, used on the market and in catalogs - the berth is formed not by lowering the soft back, but by raising an additional platform hidden under the seat. The model does not have a compartment for linen.
“Walking Eurobook” differs from the standard model in the absence of roll-out rollers that spoil the floor covering.

Pantograph

Puma

Walking Eurobook
There are two main types of transforming sofas in shape:

Straight sofa. It is located along the wall and can be extended using one main section.
Angular. The L-shaped model has two sections, the side one being stationary with a drawer for storing linen, and the pull-out one allowing you to significantly increase the size of the bed.

For the convenience of attaching pillows when preparing for bed, removable holders are used.

Manufacturers offer pantograph sofas with removable or stationary, soft or hard armrests, with open shelves or minibars built into the sides. Some models do not have armrests at all. Such designs are installed in the bedroom, because the absence of side parts makes it easier to access the unfolded sofa from any side.

Despite the fact that there are no official uniform size standards, and manufacturers offer to produce the selected model in any required dimensions, there are several main options for upholstered furniture: standard straight, large, small and corner sofa. The table shows the parameters of products of different sizes. You should definitely familiarize yourself with the dimensions of the furniture before purchasing.

Bed size, mm

When purchasing a furniture structure, you need to pay attention to the dimensions not only when folded, but also when unfolded. The pantograph sofa requires quite a lot of working space to unfold.

Mechanisms of transformation

Mechanisms of transformation

The main criterion for choosing a sofa as a sleeping place is the type of its transformation mechanism. Knowing the features of various transformation mechanisms, you can easily choose the most suitable sofa for your purposes.

The Dimir factory produces and offers folding sofas with the following mechanisms:

“Book ” is a classic transformation option, one of the first to be used in the manufacture of folding sofas. The sofa unfolds in the same way as a book unfolds.

How to unfold : we raise the seat, causing the back of the sofa to lower, taking a horizontal position, then lower the seat, we get a single sleeping surface from the horizontally located back and seat.

Advantages : inexpensive and durable mechanism. Large linen drawer. Due to its convenient design, the mechanism is used both in economy class sofas and in more expensive models.

Features : To conveniently lower the backrest, free space is required, so the sofa cannot be placed close to the wall. The bed is located along the sofa.

Sofas – books in our collection:

Terra
Mirabel
Latte
Orange
Forest
Yalta-2
Vincent

“Eurobook” is a roll-out, easy-to-use mechanism.

How to unfold: you only need 2 steps: roll the seat forward, lower the backrest.

Advantages: Despite its compact appearance, it transforms into a spacious sleeping place. Suitable for small spaces.

Features : When choosing a sofa, pay attention to the presence of casters. If the model is equipped with wheels for rolling out, this makes it more convenient and easier to use, and also protects the floor from damage.

Our sofas with a transformation mechanism: Eurobook:

Denver 1
Virginia
Europe
Ralph
Rydberg
Senator

“Side Eurobook” is a transformation mechanism similar to the “Eurobook”, but the roll-out part of the sofa is located on the left or right. When unfolded, it is a full-fledged sleeping place for one person. Used mainly in ottomans.

How to unfold : no need to move it away from the wall to unfold. The seating part is moved to the side, and the side of the sofa is placed in the vacant space.

Advantages: When purchasing, you have the opportunity to choose the preferred location of the transformation mechanism: left/right. The sofa takes up little space and is convenient for small spaces; the linen drawer is located under the entire sleeping surface.

Features : you can place the backrest close to the wall, but there should be free space on the sides of the sofa - for rolling out the part of the berth and lowering the side part.

The “Side Eurobook” transformation mechanism is implemented in ottomans:

Irina-1
Irina-2
Dream
Neo-2
Oliver

“Dolphin” is a high-rollout transformation mechanism, the most durable among mechanisms of this type. The sleeping place is equipped with a metal frame, which gives additional strength to the structure.

How it folds out : The lower section rolls out from under the seat, then lifts forward and up. By means of metal brackets it is held flush with the seat.

Advantages: the sleeping area is flat and wide. The furniture is suitable for permanent use.

Features: The “Dolphin” transformation mechanism is intended mainly for corner sofas, which is explained by the design features. Straight sofas equipped with this mechanism do not have a drawer for linen, since a transformation module is located in its place. In corner sofas, the linen box is located in the side module.

We offer corner sofas with the Dolphin mechanism:

Avenue
Jersey
Lazio
Palmyra
Todes
Enigma-M

Tick-tock is an improved version of the Eurobook mechanism. The base does not roll out, but extends in two steps. Otherwise, this method of transformation is called “walking”.

How it unfolds : The sofa seat lifts up and slides forward

using a lever-spring mechanism. The backrest is lowered into the vacant seat.

Advantages: the sofa unfolds without touching the floor, so it can be placed on any surface without the risk of damaging it.

Features : The mechanism is used in both straight and corner sofas.

Options for sofas with the Tick-Tock mechanism in straight and corner versions:

Savannah
Camelot
Melange
Enigma
Rydberg

"Accordion" is the easiest transformation mechanism to use. The sofa consists of three parts fastened together - front and back backs and a seat. Transforming the sofa requires a minimum of effort; it moves apart and slides like an accordion (stretch and fold).

How to unfold: slightly lift the lower part of the seat and pull it towards you until the sofa is completely transformed into a sleeping place. It works according to the same principle: just repeat all these steps in reverse order.

Advantages: Models with this mechanism can be used as a daily bed.

Features: In straight sofas of this type, the design does not provide storage space.

Sofas with the “Accordion” mechanism:

Counterparts
Cologne
Accordion
Brooklyn, modular system

Mixotoil (French folding bed ) is a three-fold transformation mechanism, usually used in guest furniture. Both straight and corner sofas are produced with this mechanism. The sleeping place is located perpendicular to the back.

How it unfolds : the seat is pulled up and towards itself using the handle in the front part of the structure, installed horizontally, after which the remaining sections are unfolded sequentially.

Advantages : Lightweight, easy to transform design. Convenient and compact when folded.

Features : Models of this design do not have a linen drawer, since the space under the seat is occupied by the transformation mechanism. Due to its increased softness, it is not suitable as a permanent sleeping place. When unfolding, the pillows must be removed.

We offer sofas with the Mixotoil mechanism:

Hilton
Pallas
Forward, modular system

Glider is a mechanism for transforming a folding chair, complemented by the functions of rotation and rocking. Furniture with a “Glider” mechanism is used as a lounge chair and rocking chair.

Recliner - a mechanism for transforming a folding chair for relaxation, without rotation and rocking

How it unfolds: the mechanism unfolds fully or partially using a special lever. The backrest lowers to a reclining position and the footrest extends.

Advantages: The angle of the backrest can be changed. The design includes a retractable footboard equipped with a built-in support. The most comfortable furniture for rest and relaxation.

Features: When unfolded, the rotation and swing mechanism is blocked .

Armchairs with the “Glider” mechanism:

Hilton
Pallada M

"Recliner": Melange chair

“Sofa” is a low-rollout transformation mechanism used in small-sized sofas.

How to unfold: to transform, you need to pull the seat towards you using the loop provided in the design. The base (linen box), extending out, extends a platform on which the folding backrest and seat cushions are placed, forming a berth.

Advantages: Compact . Easily transformable. There are small storage containers.

Features: low platform height. The sleeping area consists of three parts.

This transformation mechanism is presented in small-sized sofas:

Charlie,
Martinique 3
Vega 2
Vega 3

Laying pillows on the base is a roll-out mechanism designed specifically for small-sized furniture. Safe and convenient to lay out. Depending on the design, the base extends from one or both sides of the ottoman.

How to unfold: The base slides to the side to reveal a linen drawer on which pillows can be placed.

Advantages: Installed close to the wall. The included pillows can be used in the nursery as seat poufs or as an additional backrest. The design is equipped with convenient rollers for rolling out.

Features: Small storage space.

Ottomans of this design are represented by the following models:

Anfisa
Irina 3
Lucy

Lifting mechanism on gas lifts - designed to lift surfaces connected to it. It works on the principle of a car shock absorber . Used in beds, provides quick access to a storage box equal to the area of the bed. A sleeping place equipped with such a transformation mechanism serves as both a bed and a wardrobe.

How to unfold: using a handle made of thick fabric located on the side of the bed, the mattress rises, revealing a storage box.

Advantages: helps create spacious storage space, provides significant savings in usable space; Silent operation and smooth running of mechanisms.

Features: the box is located low above the floor, so there is no free space under the bed, which makes cleaning difficult.

The Dimir company offers beds with a gas lift mechanism:

Adagio
Linda
Nevada

Today, the Dimir factory presents sofas of different designs and types of folding. Folding mechanisms are not “better” or “worse”; it all depends on the purpose of the furniture. After familiarizing yourself with the types of transformation mechanisms, you can easily decide on the choice of the sofa you need.

Manufacturing materials

Manufacturers of upholstered furniture produce transformable sofas with a variety of fillings, upholstery and frame materials. The service life of the product depends on the choice of components. In the production of economic models, cheaper and therefore lower quality materials are used.

To make the base the following are used:

Metal frame. The steel frame is made of thin-walled tubes. Models with a tick-tock transformation mechanism are produced with the installation of a combined or metal base. The use of lamellas or wavy springs allows you to increase the permitted maximum weight to 250 kg.
Tree. High-quality and durable frames are made from hardwood materials: oak, walnut, ash. The use of pine reduces the cost of production, reduces the cost of the finished product, but negatively affects the quality and durability. Elite models are made of mahogany. The sofa folding mechanism is made of steel parts.
Chipboard and plywood. Combined frames, in which wood and particle boards are combined, are installed to reduce the cost of furniture. Sofas with a plywood base are considered the most fragile.

Popular manufacturers

Russian manufacturers use modern equipment of the latest generation, high-quality materials, and high-quality fittings. Designers are developing the latest models of upholstered furniture taking into account the wishes of consumers. Popular factories that monitor the quality of finished products and offer a wide range of sofas with a pantograph transformation mechanism:

"Parma". A factory from Perm that specializes in the production of children's furniture. Only high-quality and safe materials, Russian and foreign, are used in our work. Another domestic company known for its modern and practical furniture. Production is located in Ulyanovsk. The company prides itself on combining experience, expert knowledge and the latest developments.
"MDV". A domestic manufacturer that has been operating since 1998. The product range includes more than 150 furniture models. The manufacturer assures that any product can be used both at home and for commercial purposes.
"Master Furniture". This company specializes in the manufacture of sofas and armchairs only. The assortment includes straight, angular, modular models, advertisers, and kitchen products.

The “tick-tock” sofa is very convenient to use, easily unfolds, does not take up too much space, and is therefore in demand among people with different incomes and standards of living. It does not damage the floor covering and creates a smooth sleeping area. When choosing, you should pay attention to a model from a well-known manufacturer; be sure to read the quality certificate.

Parma

Ardoni

MDV

Master Furniture

Upholstered furniture / Tick-tock mechanism

The mechanism for transforming upholstered furniture is “tick-tock” or “pantograph”. The “tick-tock” (or “pantograph”) transformation mechanism for upholstered furniture is a close relative of the “Eurobook”. Like the Eurobook, it is intended for everyday use because it is easy to use, reliable and, when unfolded, forms a flat sleeping place. Its main advantage compared to the “Eurobook” is that when unfolding upholstered furniture it does not come into contact with the floor and does not scratch it. The “Eurobook” seems to “ride” along the floor, and the “tick-tock” is designed in such a way that during the unfolding process it rises above the floor, and then neatly stands in the right place. Upholstered furniture with a tick-tock mechanism is laid out as follows. First, you need to remove everything unnecessary from the sofa: decorative pillows, things. Then lift the lower part up and pull it towards you. When the seat moves forward, we continue to hold it by the bottom of the panel and lower it to the floor. It doesn't take much effort to hold the seat. At this stage, the “pantograph” mechanism built into the sofa is activated, which holds the seat and helps lower it to the floor exactly and exactly where it is needed. The back of the sofa is the second part of the bed. We put her on the free space and the wide bed is ready for sleeping. Upholstered furniture with a tick-tock mechanism is well suited for those who take care of carpets or flooring in their home. Furniture with a “Eurobook”, “roll-out” mechanism and other structures with a berth that “pulls out” from the seat usually rides along the floor on special rollers. If the sofa is converted into a bed occasionally, for example, only for guests, the carpet and flooring will not cause much damage. However, if you plan to lay out upholstered furniture every day, you need to take into account that sooner or later the rollers will leave marks on the floor. The tick-tock mechanism does not have this drawback. Upholstered furniture with a tick-tock transformation mechanism usually looks very elegant and modern. Perfect for those who like straight lines in their interior. Since the seat and back of a sofa or armchair are turned into a sleeping place, they are made smooth and moderately rigid. You won’t be able to “sink” in this sofa, as, for example, in a sofa with a “roll-out” transformation mechanism, but for lovers of softness and comfort, “tick-tock” sofas are often equipped with pillows, thanks to which the back can be made soft and lush. At the Fiesta factory, the “Mustang”, “Vanilla”, “Regata”, “San Remo” and other models of sofas are equipped with a “tick-tock” transformation mechanism. Especially for fiesta-mebel.ru. Copying without a link The mechanism for transforming upholstered furniture is prohibited!

Attention! Any inaccuracy or price error found on this website is nothing more than a misunderstanding. Check the information from the store manager. Any information contained on this website is for reference only and is not a public offer under Art. 437 of the Civil Code of the Russian Federation.

Sofa with Tick-tock mechanism (Pantograph)

Due to their compactness and ease of use, folding sofas quickly became and still remain popular furniture, which is often used to decorate small apartments. One of the options for a folding design is a sofa with a tick-tock mechanism. Our article will describe in detail all the features of this piece of furniture.

Dolphin

The mechanism got its name because of its special folding: the sleeping place slides under the sofa seat - visually this resembles a dolphin diving into the water. Some furniture factories call this mechanism “kangaroo”, it’s not hard to guess why.

Sofas with a dolphin mechanism are easy to unfold: you need to slide the lower part of the sofa out from under the seat, and then pull it up using the strap until the cushions are level. “Dolphin” is often installed on corner models; in this case, the laundry compartment is located in a fixed part - a corner module (canapé).

Advantages: — spacious; — when disassembled it does not take up much space; - reliable; - Easily transformable.

How to fold out a sofa tick-tock

Unfolding it is not a difficult task, just follow these instructions:

Remove pillows and other decorative items from the pantograph.
Gently lift the seat, pull it forward, and then place it on the floor.
To fill the empty space behind the seat, lower the soft part of the backrest into it.
Cover the unfolded furniture with bed linen.

Photo: The principle of operation of the tick-tock mechanism (pantograph) in the sofa
To assemble the pantograph back, do all the described steps in reverse order. It is very easy to unfold and fold the sofa, so it can be used to decorate a child’s room without worrying that the child will not be able to handle it on his own. Transformation is possible even with one hand.

Photo: Tick-tock sofa, model Julia from Hoff

Advantages and disadvantages

The main advantages include the following:

Ease of use.
Reliability and durability.
Smooth sleeping surface.
Spacious linen drawer.
When unfolded, the legs do not damage the floor covering.

There are not many disadvantages of tick-tock sofas, but they still exist:

For some, the seat when folded may seem too wide;
the design consists of a large number of parts, which complicates the repair of furniture if it breaks;
high price.

Advantages and disadvantages of the mechanism

The popularity of sofas with a tick-tock mechanism is justified by a number of advantages that it gives the model:

simplicity and convenience of transformation;
versatility, allowing it to be installed in any type of sofa;
excellent strength of the folding system;
high reliability;
wear resistance and durability;
possibility of effective daily use;
diagram of quick and easy unfolding and assembly of furniture;
possibility of installing the model close to the wall;
inclusion in the design of a large drawer for storing linen;
maintaining the integrity of the decorative floor covering when there is no need to roll out furniture on casters.

Along with such a large list of advantages, the tick-tock mechanism in the sofa has some disadvantages, the main one of which is the high price of the products, in addition:

the assembled seat is too wide and may be uncomfortable;
Repairing the pantograph mechanism is complex and quite labor-intensive, so it will be difficult to fix the breakdowns yourself.

The production of sofas today is often carried out according to individual measurements, which allows you not to worry about whether the sofa you like will fit in the room.
The tick-tock sofa is multifunctional, allowing for comfort and ease of use.

The pantograph sofa will not take up much space, while providing its owners with a spacious sleeping area.

Samples of upholstered furniture with this type of mechanism can be found on the websites of manufacturers or online stores, where you can familiarize yourself with the catalog and choose the most appropriate product option.

Customer Reviews

Most often, buyers of tick-tock sofas are satisfied with the purchased furniture. They note the following advantages:

convenience and ease of unfolding and folding, thanks to which the furniture can be used by both children and adults;
compact dimensions that allow you to comfortably place such furniture even in the smallest rooms;
convenient double rear partition;
when disassembled, the pantograph looks no worse than when assembled;
beautiful appearance that allows you to fit harmoniously into any interior;
convenient and spacious linen box;
Spacious bed that can easily accommodate two adults.

What is the difference between tick-tock and eurobook mechanisms, which is better?

“Tick-tock” is an improved version of the “Eurobook”, distinguished by its transformation mechanism.

When unfolding the “Eurobook”, the seat rolls on its wheels on the floor each time, while in the “tick-tock” design a pantograph is installed that allows you to extend the seat without touching the floor.

Because of this feature, frequent use of the “Eurobook” as a bed can lead to rapid damage to the floor covering. Therefore, if you plan to disassemble transformable furniture every evening, it is worth buying “tick-tock”, which is completely safe for any floor covering. In addition, the wheels used in the “Eurobook” often fail, which is another disadvantage of this design.

Video: Tick-tock mechanism (pantograph) in the sofa, how it unfolds

The tick-tock sofa bed is a comfortable and reliable piece of furniture, perfect for a small apartment. If you spend money on purchasing such a piece of furniture, you will get a sofa that will fit perfectly into the design of your home and will last for many years.

source

Tick-tock mechanism in the sofa

The tick-tock mechanism for upholstered furniture has a number of advantages over other popular sofa folding mechanisms. Otherwise it is called a pantograph. Manufacturers began to use this type of design relatively recently. Durable details and the ease with which the sofa turns into a bed are the main advantages that attract buyers. The “tick-tock” transformation mechanism is used to equip large modular sofas for home theaters, furnish spacious living rooms and small apartments.

They are used for relaxing in living rooms during the day, while watching TV shows, reading books, talking with family and guests. And as a sleeping bed at night. The name "tick-tock" is reminiscent of the characteristic sound that is heard during transformation.

Factories and models

Today, tick-tock sofas are produced by many manufacturers.

Vladimir factory 5 stars

Vladimir factory 5 stars has been producing furniture since 1998. Using modern developments and technologies, the factory produces beautiful modern furniture, among which sofas with a pantograph transformation mechanism stand out.

A wide range is represented by such models as Parma, Prometheus, Laska.

The comfortable and compact Prometheus sofa with dimensions of 235x110 cm will be a wonderful decoration for any living room.

A wide berth of 150×200, coupled with an independent spring block, will provide comfortable accommodation for two people. The straight design with soft armrests and three sofa cushions will fit perfectly into any interior.

The Laska model is presented by the company in angular and straight versions, both of which have a modern design.

The rigid arched armrests in both models are perfectly combined with soft back cushions. The dimensions of the corner model when folded are 235x155 cm. Thanks to the independent spring block, a flat sleeping area measuring 145x200 cm is formed.

Russian master

The Marrakesh sofa is produced by the Russian Master furniture factory, specializing in the production of inexpensive models of original design and decent quality. The straight design of the Marrakesh model is equipped with three soft, comfortable cushions. Two-level armrests consist of a rectangular wooden and soft lower part.

The classic model with a spring block will provide comfort and coziness for the whole family.

MDV

The MDV factory, which produces the Tibet model, has been producing upholstered furniture for more than 15 years.

The product has a straight design with chrome-plated metal legs and smoothly curved wooden armrests. Folded size 216x96x98 with sleeping area 140x190. The filler for the soft spot can be either a spring block with polyurethane foam or higher-density polyurethane foam as an independent filler.

Rival

The Rival factory has been producing upholstered furniture since 1996. Based on the wishes of customers and partners cooperating with the company, the Seattle model was developed in two versions.

The first design is characterized by the presence of armrests with built-in drawers, in which it is convenient to store various small items. In the second option, the armrests have a slight angle of inclination, and the model itself is slightly smaller in size without compromising the sleeping area.

Both options are equipped with an independent box spring and a wide berth of 152x202 cm. The dimensions of the first design are 246x110x95 cm. The second design is slightly shorter and measures 228x110x95.

The Quadro sofa from a Russian manufacturer on a spring block differs from other models in the presence of niches built into the armrest. Decorative pillows included in the set will provide a cozy pastime with your family.

Ulyanovsk furniture factory "Baroque"

The compact and cozy Venice model, produced by the Ulyanovsk furniture factory Baroque, has small dimensions of 201×100. It will easily fit in any room. The model is equipped with beautiful two-level armrests and soft sofa cushions.

Principle of operation

The transformation mechanism is quite simple. The main stages of its unfolding are listed below:

Soft pillows that are included in the furniture set are removed from the surface.
The seat is lifted up, smoothly pulled out and placed on legs made of a durable profile.
The rear backrest is folded into the resulting space.

Note! When extended, the sofa legs do not scratch the floor or spoil the carpet pile.

Its predecessor, the Eurobook transforming device, did not have such a retractable element, which helps raise the sofa plane above the floor without the legs touching the covering. A pantograph is an improved and modernized mechanical method of unfolding a surface to the level of a berth. Complex in its design, it nevertheless makes the transformation process easy and convenient.

Characteristics and main differences

The “tick-tock” transforming device differs from competitive models in high quality materials, reliable long-term operation without breakdowns, and wear resistance. Here are the main characteristics of sofas with this mechanism:

The complex design of a high technical level allows it to be installed on wide sofas of various configurations. And also equip the furniture with shelves-armrests with the function of shelving;
does not require physical strength and complex manipulations during transformation;
daily use of the bed function does not weaken the effect of the pantograph;
The wide and level sleeping area can withstand loads of up to 240 kg.

in a range of fabric upholstery, including leather. A variety of colors from dark muted to light bright colors;
with a set of soft multi-colored pillows to match the sofa upholstery. When dirty, covers can be removed for washing. If you wish, you can sew the covers yourself;
with built-in drawers for storing things and bedding.

Reasonable prices will please you, and the luxurious look will decorate any most fashionable living room.

Important! The mechanism is reliable and retains its functionality for many years, even under frequent use.

Tick-tock (Pantograph)

The pantograph mechanism is a relatively new invention in the furniture industry. Nevertheless, sofas with a pantograph mechanism are very popular among buyers. The pantograph transformation mechanism is very easy to use and can withstand loads of up to 240 kg.

Most often, the pantograph, or teak mechanism as it is sometimes called, can be found in luxury modular sofas for home theaters and spacious living rooms. At the same time, the price of sofas with a teak mechanism remains affordable for most buyers with average incomes. The teak transformation mechanism effortlessly turns the sofa into a wide and comfortable sleeping area, comparable to a large bed.

The name tick tock is nothing more than an onomatopoeia, like click clack, a more well-known and widespread mechanism. This is the sound that the tick-tock sofa transformation mechanism makes when transforming. The operating principle of the pantograph is as follows. First, you remove all the upper soft elements from the sofa - pillows and bolsters. After that, take its front part and smoothly pull it towards you and slightly upward. At this time, the mechanism straightens out and you place the seat on the floor.

Compared to other mechanisms, the pantograph is considered quite complex. It consists of more parts, and the principle of its operation is noticeably different. But thanks to its higher technical level, it allows the production of wide and complex sofas consisting of several seat modules. And recently, sofas with practical shelves and armrests, which can even serve as small shelves, have also come into fashion.

Furniture designers believe that the ideal “frame” for sofas with a teak-tock transformation mechanism is genuine leather. She best suits their status. But even in fabric versions, models with a pantograph look great. They can be any color - from classic dark brown to super fashionable beige.

The sofa with teak mechanism is perfect for daily use. At the same time, this is a universal sleeping place for guests - flat and wide. An indispensable decorative feature of sofas with a Belarusian pantograph is a set of “mixed-sized” pillows that are removed when the sofa is unfolded. Most often, they are covered with covers that contrast with the upholstery of the sofa - this further emphasizes its elegance. As a rule, these covers are removable, so you can easily change them, setting the mood of your interior. Another feature of sofas with a tick-tock mechanism is a built-in drawer for linen and bedding.

A sofa with a pantograph is luxurious, very fashionable and, most importantly, furniture accessible to everyone. It will fit perfectly into any interior and will become its real decoration. Don't waste a minute, order right now!

Unfolding process:

Remove the cushions, pull the front of the sofa towards you, pull out the seat and place the mechanism on the floor. Lower the backrest.

Advantages of the mechanism:

Easy to use, durable, large and comfortable sleeping area. Niche for storing linen.

Corner furniture with “pantograph”

Corner sofas with a tick-tock mechanism look modern and stylish in both bedrooms and living rooms. Make communication between family members or guests comfortable. Their main advantage: the presence of two drawers for linen. A lifting ottoman in the corner and a spacious closet for storing any items under the seat. There are corner orthopedic sofas. An orthopedic block in the form of independent springs is installed under the sleeping surface. Here’s a video demonstration of how the “tick tock” mechanism works in a sofa:

Advice! The corners are attached on the left and right sides. When purchasing upholstered furniture, pay attention to where the ledge is located and what its dimensions are. To do this, it is recommended to first measure the room and decide where your useful purchase will be placed. Then it will fit comfortably in the room and will look elegant without cluttering up the space of the room.

French folding bed (Mixotoil)

Sofas with a French folding mechanism are better used for sitting than for sleeping. We recommend using the mechanism as a guest sleeping option. The folding bed itself is located under the seat. To disassemble it, you need to remove the cushions and pull the edge of the seat. The parts of the folding bed will move apart and stand on their legs.

Advantages: — spacious; - compact.

What do the owners say about the “walking” sofa?

As a rule, people who have purchased Tick-Tock leave very good reviews about the “walking” transformation. They are satisfied with:

simplicity of the mechanism when unfolding the sofa. Both young and old people can cope with this;
compact dimensions;
beautiful design, soft landing cushions;
high legs, additional rear partition. When disassembled it looks aesthetically pleasing and beautiful. Fits organically into the design of the room;
a fairly spacious box for bedding;
The sleeping area is the size of a double bed. The connection of two parts of sofa cushions does not disturb the flat sleeping surface.

By the way! The Eurobook mechanism damages the carpet when pulled out. Wheels often fail. “Tick-tock” does not have these disadvantages.

Who produces

Prices vary depending on the finishing material. There are no downsides to using sofas with a tick-tock device. All parameters correspond to the purpose of the furniture, both as a place to relax in front of the TV and as a comfortable place to sleep. Today, many factories throughout Russia have launched the production of furniture with a “walking” mechanism. Among them:

Furniture factory "Donavan", Shchelkovo.
Furniture factory "Karina", Izhevsk.
Furniture factory "Vivat", Ryazan.
Furniture factory "Mirabel", Kostroma.
Furniture factory "Fares", Kirov.
Furniture factory “Formula of Comfort”, Ulyanovsk.
Furniture factory "Anyuta", Vladivostok.
Furniture factory "Viyana", Moscow.

Factories cooperate with furniture showrooms, shops, and regional warehouses. A fairly extensive network of online stores has appeared. Product catalogs and descriptions are presented on the pages of their websites. Consultative assistance from expert sellers is provided. You can choose sofa products according to your taste, size and color.

Each manufacturer has official websites. You can purchase furniture through a warehouse, bypassing the intermediary. Most products have a service warranty period. Functional furniture with a tick-tock mechanism will make your home cozy and modern.

source