High-foaming shampoo for carpets and furniture Pramol-Chemie AG Tapi-shampoo 10 l For basic cleaning of carpets and furniture from PRAMOL-CHEMIE AG: cost, photo, description.

If there are small children in the house or the owners like to have a snack while sitting on the sofa in front of the TV, then the appearance of stains on the upholstery of upholstered furniture is almost inevitable. Vanish for sofas will help remove traces of dirt and dust. This product is available in several versions, so you can choose a product for different upholstery materials.

Varieties of this product

Vanish shampoo for manual carpet cleaning

It owes its popularity among consumers to the optimal combination of cost and properties.

Advantages:

removes animal hair;
eliminates unpleasant odors;
The carpet becomes fresher, softer and several times cleaner than during regular cleaning.

Flaws:

If before using this product the carpet was not thoroughly vacuumed from dust, dirty stains may remain after cleaning it.
Antibacterial shampoo for cleaning carpet stains – available in 450 ml format. A special feature of this product is the ability to remove bacteria with an almost 100% rate.

Advantages:

denser and more abundant foam;
kills almost 100% of bacteria.

Flaws:

more toxic than regular Vanish shampoo for carpet cleaning.
Shampoo for washing vacuum cleaners is a product intended for use exclusively in washing vacuum cleaners. It is perfect for washing carpets and upholstery. It is a shampoo that easily forms a thick foam.

Advantages:

convenient and easy to use.

Flaws:

After cleaning, you need to dry the carpet thoroughly, since excess moisture can contribute to the formation of mold.
Moistened carpet cleaning powder - best suited for large area carpets. It easily removes old stains and dirt, bringing them to the surface due to its structure and its active elements. Can be used to remove stains on it.

Advantages:

convenient for manual cleaning;
does not require the use of water;
makes the surface clean and fresh;
no need to dry after washing.

Flaws:

It is recommended to use disposable garbage bags for the vacuum cleaner, since the powder very quickly clogs the dust container.
Aerosol active foam for carpet cleaning is a ready-made form for removing single stains, especially effective for combating stubborn stains in areas that are used more often than other places, for example, a corridor or stairs.

Advantages:

foam is easy and convenient to apply to the surface;
penetrates deep into the carpet structure and lifts all dirt and stains to the surface.

Flaws:

effective for cleaning dirt in small areas, not practical for large areas.
Stain removal spray is a very convenient product for cleaning carpets and textile furniture at home. One of its differences is that the surface does not need to be pre-wetted before cleaning. We bring to your attention an article with the answer to the question: here.

Advantages:

preserves the structure and color of fabric fibers;
works great on stains from coffee, wine, fruits, vegetables, etc.;
the product is more time-saving than other products.

Flaws:

not suitable for wet cleaning;
cannot be used on delicate fabrics, for example, velvet, silk;
will not overcome stubborn dirt.

Instructions for use

It is unlikely that you will be able to obtain a satisfactory result if you use this product for other purposes or use one product in accordance with the description of another product.

Before you start cleaning the carpet with Vanish, you need to bring the dirty surface into working condition.

To do this, the floor covering should be cleaned of dust, sand and dirt. Each product label indicates how to dilute Vanish for carpet cleaning. Next, you need to strictly adhere to the instructions that are set out there.

Carpet Cleaning Powder

Before use, the bag of powder must be shaken thoroughly
so that all its active substances are evenly mixed.
The powder should not be diluted in water.
It will be
According to the instructions, you just need to pour it onto the contaminated area and, using a dry brush (this could be a mop), spread it evenly over the entire surface.
The amount of product used during cleaning depends on the degree of contamination.
For dry Vanish for carpets to work, it is advisable to wait at least 20-30 minutes.
Then the carpet must be thoroughly vacuumed with the device at high power.
If there are places on the surface of the carpet where the powder got stuck in the pile and the vacuum cleaner could not remove it, you need to repeat the procedure in these areas - clean the surface with a brush and vacuum again.

Spray for carpet stains

Prepare the carpet surface for cleaning - vacuum the carpet.
Prepare the product for use - the spray bottle must be clean and dry.
Open the bottle with the product carefully by turning its spout to the left.
Apply the product directly to the site of contamination. To obtain a faster effect, the stain can be scrubbed with a soft brush.
Leave the product to react for 5 minutes.
Remove any remaining product and dirt
from the surface with a clean sponge or cloth.

Shampoos for carpets

Getting rid of dirt and dust on the carpet.
If possible, it is recommended to thoroughly beat the carpet outdoors.
Next, you need to mix this product with water in a ratio of 1 to 9.
For a more accurate measurement, you can use a shampoo cap. The water should be slightly lukewarm, but not hot - about 40 degrees.
To wash a carpet, foam is needed,
so the existing solution must be thoroughly shaken.
We apply foam to the entire carpet
or to the part of it that is planned to be washed - it should lie on the surface in an even layer. There is no need to moisten the carpet too much, because this can cause it to settle later or cause stains to form on it.
Next you need to clean the carpet with a brush or sponge.
You can use a regular detergent to remove stubborn dirt and stains.
After the foam cushion has settled, you should simply vacuum the surface
. To remove the product more thoroughly, you can go over the carpet again with a stiff, damp brush.
If the instructions were carefully followed,
then after the procedures performed the surface should be almost dry. To completely dry the carpet, you need to leave it for several hours, usually 2-3 hours is enough.
If dirt remains after the first cleaning, the procedure can be repeated.

Carpet foam

Before cleaning, the carpet or carpet must be thoroughly vacuumed to remove excess dust and dirt.
Before use, the container with the product should be shaken thoroughly. We saw the foam over the surface.
Distribute the foam evenly over the carpet using a rubberized mop or damp cloth.
Leave the product for 2 hours or wait until it dries completely.
Carefully vacuum the surface with a regular vacuum cleaner.

Products for cleaning vacuum cleaners

Before using this type of product, it is recommended to follow the instructions:

The quality of the final result
is directly related to the preliminary preparation of the carpet. Therefore, before starting cleaning, it is necessary to thoroughly vacuum the carpet.
Mix the product with water in a ratio of 1.5 to 1
. For convenience, you can use a cap from a shampoo bottle.
The water should be cool
(no more than 40⁰). Stir the product well.
Pour the resulting mixture into a washing vacuum cleaner
, and vacuum the surface in the usual way. It is necessary to ensure that the carpet is not too wet.
On heavily soiled areas
, leave the product on for 5 minutes or wait until it dries completely.
When the carpet is dry
, it must be vacuumed again without using shampoo.

Please note that when using any type of Vanish for cleaning carpets, you should definitely test it on a small, inconspicuous area of the carpet before using it.

Also, when using Vanish carpet detergents, you must wear gloves. After cleaning is completed, the room must be ventilated.

Basic cleaning

Depending on the type of fabric, basic cleaning is carried out using shampoo or powder.

Rules for working with shampoo:

pour the shampoo into a suitable container, dilute with water (proportions – 1:9);
beat the foam;
Using a sponge, apply foam to the upholstery, being careful not to wet the sofa too much;
Allow the product to work (holding time depends on the degree of contamination - from 30 minutes to 1 hour);
vacuum the upholstery.

If powder is used, then you need to proceed like this:

sprinkle the surface to be cleaned with powder;
using a sponge or brush, gently rub in the product without making much effort (if the upholstery is made of velor or flock, then you need to clean strictly according to the pile);
let the product act for 30 minutes;
Clean the surface with a vacuum cleaner or brush.

If, after cleaning the upholstery, whitish stains remain on it, then you need to treat the surface with a soft, dry brush and vacuum again. If stains remain on leather or dense fabric, then traces of detergent are removed with a damp cloth.

Price

Prices for carpet cleaning products from the Vanish brand are above average in comparison with similar products from other companies. The retail price at different retail outlets may differ from each other, since it depends on the amount of the intermediary's markup.

Shampoo for manual carpet cleaning (450 ml) – 262 RUR.
Antibacterial shampoo for manual carpet cleaning (450 ml) – Got rid of the smell from the pipes, the water drains very quickly. If your drain pipes are clogged in your bathroom and sink, and there is an unpleasant smell in your kitchen, then this product will help.”

There are many detergents that can be used to remove dirt and stains from carpets. Housewives consider Vanish to be the best product, because its active foam makes carpets fresher, brighter, and cleaner. One of the important features of this product is that the carpets are slightly moistened, and therefore dry quickly.

Today we will talk about cleaning carpets with Vanish products, find out what customer reviews are about it.

Reviews of carpet cleaner Vanish

Reviews of Vanish carpet cleaner are mixed. Most housewives are glad that there is a Vanish product that effectively cleans carpets.

Arina writes: “I only use Vanish to clean carpets. I tried many coating refreshing products before choosing this one. Vanish active foam cleans perfectly and dries quickly.”

Elizabeth o

Alexandra says: “I tried everything to get rid of the smell from pets, but I cleaned the carpet with Vanish, and the smell of cat urine went away. The carpet smells nice.”

There are also negative reviews. Natalya is indignant: “Everyone praises Vanish carpet cleaner, but it didn’t help me. The carpet was as dirty as it was. I applied the foam to the carpet according to the instructions. My vacuum cleaner doesn't work, it's broken. I swept the carpet 15 minutes after applying the foam with a broom.”

Valery did not like Vanish for carpets. He claims that Vanish does not clean well.

Pay attention to negative reviews. The people who wrote them say they acted according to instructions. But that's not true.

Read carefully and you will find that they violated the rules for using Vanish, which is why they have a low score. Acting strictly according to the instructions will help you return the carpet to its original appearance.

Carpet products Vanish

There are several types of Vanish for cleaning carpets:

Shampoo for carpets and upholstery. Rich foam removes stains and stubborn dust from carpets and upholstery, and eliminates unpleasant odors.

Shampoos also include antibacterial and shampoo for cleaning vacuum cleaners.

Spray for removing stains from carpets, it removes old stains from carpets, stubborn greasy stains.
Active foam for carpets “Cleanliness and freshness”. A light application of foam penetrates deep into carpet fibers to lift away dirt and stains.
Moistened carpet cleaning powder. It dries very quickly in just 20 minutes and helps get rid of tough stains and dirt on large carpets.

Instructions for use of Vanish, included with each product, will help you properly clean and refresh your carpet.

How to use Vanish for manual carpet cleaning?
Antibacterial shampoo differs from regular shampoo in that it contains added components that kill microorganisms and bacteria and disinfect the carpet.
The rules for using antibacterial shampoo are the same as when using shampoo for manual carpet cleaning.
Methods of using Vanish shampoo for washing vacuum cleaners.
First, vacuum the carpet.
Then dilute the product: one and a half caps per liter of water.
Pour it into a washing vacuum cleaner.
Vacuum the carpet.
As soon as the carpet is dry, vacuum with a detergent vacuum cleaner, but without any product.
Instructions for using moistened Vanish powder
How to use carpet spray
Carpet cleaning with Vanish products, feedback after testing is the topic of our conversation today.
We told you about Vanish, its types, introduced you to reviews of different people about it and advised you how to use Vanish correctly according to the instructions.

So, we have a carpet that needs to be cleaned of dirt, and a cleaning product called “Vanish”. How to remove stains and return the flooring to its original appearance? First of all, the existing kit should be supplemented with a brush or sponge, a container for dissolving the product in water, and we will also need water and a vacuum cleaner.

Naturally, “Vanish” has a wide variety of uses; this is typical for any product. It should be noted that most negative opinions about the product are due to the fact that it was used incorrectly, trace

Unfortunately, the expected result after cleaning was not obtained. To avoid this, you need to follow a few fairly simple steps.

First of all, you need to get rid of dust and small debris on the carpet, for this you use a unit familiar to everyone called a vacuum cleaner. You can knock out the coating on the street; this option will even be more effective. It should be immediately noted that if the front is not cleaned of dust, stains may appear on it, which will then be very difficult to remove.

Now we proportionally dilute Vanish for carpets. Reviews about it, by the way, often have a negative connotation precisely because the product is not mixed correctly with water and applied incorrectly. Therefore, special attention should be paid to this stage. To achieve the desired result, you need to mix one part of the product and nine parts of water; you can use any small container for this or just take a cap from the product. The water should be warm, but in no case hot, about 40 degrees.

Now necessary

o beat the solution until foam is obtained. This is what is used for cleaning. Here, again, it should be noted that sometimes housewives do not do this and apply the resulting liquid to the coating; it is not surprising that after this there are negative reviews about the “Vanish” product for carpets.

Now you need to take a large brush or sponge and apply foam to the entire carpet. If you mean cleaning only one area, then, accordingly, it needs to be distributed only in this place. Be sure to take into account that the coating should not be very wet - this can lead to stains or shrinkage.

After “Vanish” for carpet cleaning in the form of foam is applied to the required area, you can proceed directly to cleaning. This should be done with the same brush or sponge. The foam is rubbed in in a circular motion, paying special attention to the most contaminated areas. If there are strongly ingrained stains on the coating, some time before starting cleaning you should splash a small amount of the product on them.

After finishing cleaning, the carpet should dry. For this

It takes about 2-3 hours, but the best option is to leave the product on it overnight. At this time, you should not walk on the surface and it is better, if possible, not to be in this room. It is recommended to ventilate the room while drying the carpet.

Now you can begin the last step - vacuuming the carpet. This is necessary in order to get rid of the dried product. It should be noted that

The American company Reckitt Benckiser has branches in 60 countries and produces detergents under various brands, including Vanish for carpets. The products are in demand among consumers. A good effect can be achieved by strictly following all instructions.

Vanish is very popular among consumers

Given the large number of countries, manufacturers do not describe the rules for cleaning and removing stains, but place diagrams and pictures on the back of the bottles.

When using Vanish, you must strictly follow the dosage. Excess detergent and foam remain on the pile and create a sticky film. Vanish cannot be used to clean silk carpets and handmade natural wool products.

Several types of cleaning products and stain removers are available for carpets:

shampoo for refilling washing vacuum cleaners;
wet powder;
dry cleaning shampoo;
antibacterial shampoo that removes unpleasant odors from animals;
spray to remove all types of stains;
aerosol to get rid of fresh stains.

All products, with the exception of aerosol, are in pink plastic packaging. They often sell fakes on the market. Therefore, on some types of Reckitt Benckiser products, membranes are already installed on the neck - tamper-evident films.

Regardless of which of the Vanish carpet cleaning products you will use, there are several general rules.

First, you need to vacuum the carpet on both sides and wipe the floor underneath. It is advisable to remove dust from furniture so that it does not settle.
Open the window and ensure good ventilation of the room.
Test any product on an inconspicuous area of the carpet before use. Similar testing should be done when using .
Clean the carpet, carefully observing the dosage of products and holding time.
Allow the flooring to dry, do not walk on it.
Vacuum again, even if the foam or powder is collected before drying.
Use only soft brushes.
When working with Vanish, you must wear rubber gloves to protect your hands.

Dyes react differently to Vanish; natural dyed products may experience discoloration. You should always check the compatibility of detergents and items.

Be sure to use gloves

Family members may be allergic to Vanish. Then you need to switch to products from another manufacturer, since the main components in all drugs are the same.

Regular steam mopping and cleaner usually removes dust well and restores the color of the carpet. But over time, it can develop stains that require serious cleaning.

A solution of shampoo is poured into the tank of the washing vacuum cleaner, one and a half caps - 30 ml, per liter of cold purified water. Warm liquids should not be used.

First you need to clean the carpet on both sides with a vacuum cleaner in dry cleaning mode. In some diagrams it is even recommended to knock it out in order to get rid of dust and wool as much as possible.

Vanish shampoo for washing vacuum cleaners

Go over the entire surface, washing the carpet. Let it dry for several hours. Then use a soft brush to lift the pile in a circular motion. After this treatment, the unpleasant odor that animals leave when they make a puddle will disappear.

Vanish shampoo for cleaning vacuum cleaners, can be used on furniture if it has pile upholstery. You cannot wash floors or clean other surfaces.

Before using the powder for cleaning, you should carefully consider how to use Vanish for carpets and calculate the consumption. It is indicated on the package g/m2 or the size of the area that can be cleaned with the entire contents of the pack. Simple arithmetic and you can measure Vanish for manual carpet cleaning. Excess product will create an unpleasant sticky film after cleaning.

There is no need to wet the carpet or the powder itself; it is kept at the required moisture level in the packet.

Vacuum the carpet well and do not leave dust underneath it on the floor.
Shake the packet of Vanish powder several times, mixing its components.
Sprinkle the stains first and rub them with a sponge. Then sprinkle it over the entire surface of the carpet and spread it with a soft brush, rubbing it into the pile.
After 20 minutes, the powder can be collected with a vacuum cleaner.
After a few hours, walk over the surface of the carpet with a soft brush, straightening and fluffing the pile.

Powder granules collect and “stick” to themselves fat, protein and other dirt. Then they take it with them into the vacuum cleaner bag.

Moisturized Vanish powder

After cleaning with a damp powder, the color of the carpet is restored and the unpleasant odor goes away. The product can be used when it is necessary to remove stains without cleaning the entire surface. After cleaning the dust, Vanish powder is poured onto the contaminated areas, spread with a sponge and rubbed in with light movements until the streaks completely disappear. After drying, the entire carpet should be vacuumed or brushed with a soft brush.

The shampoo is designed for dry cleaning with foam. Before using liquid Vanish to clean the carpet, you need to make a solution and beat it. The preparation of the carpet and floor is standard, as before using other cleaning products from the Vanish series.

The proportion of the solution for foam is 1: 9. More precisely, 1 cap of the product is 20 ml, and 180 ml of water, together a glass is 200 ml. You need to beat in a wide container, preferably a basin. You can use a sponge, brush or cream whisk. Each housewife decides for herself what is more convenient for her. The foam is used after it becomes thick and stable.

After cleaning the dust, apply foam to the carpet with a soft sponge. Leave to dry.
After a few hours, remove the foam with a soft brush or vacuum cleaner. The dirt and unpleasant smell will go away with it.

There is no need to reapply foam, even if it seems like there is not enough of it. The excess will remain on the carpet as a sticky residue even after prolonged drying.

Vanish shampoo for manual carpet cleaning

You cannot walk on the carpet while it is drying; marks and stains will remain.

If your carpet has stubborn stains, you can first apply foam to them and lightly scrub with a sponge until the dirt is washed away. Then cover the entire carpet with foam or limit yourself to only individual stains.

Vanish antibacterial shampoo for carpets is used, instructions for use are similar to washing shampoo. Only its main purpose is to disinfect the carpet, remove odors of dampness, mold pores, and microbes.

The shampoo is whipped into foam and applied evenly over the entire surface. If the foam falls off, beat it again. If necessary, you can spread the product a little with a soft brush so that it penetrates between the pile. After complete drying, after 4 – 5 hours, remove with a vacuum cleaner at high suction power.

If there are stains on the carpet, then sprinkle wet Vanish powder on them and rub with a brush or dry sponge. After treating all dirty areas, apply foam to the entire surface.

The foam is applied completely to the carpet after treating the stains with powder.

When treated with antibacterial shampoo, dirt is partially removed and color is restored. If the carpet is lying in a damp room, then it must be dried thoroughly, the dust must be knocked out and processed outside or moved to a dry room with good ventilation.

Many housewives who have small children and animals say that I use antibacterial shampoo, and it leaves a fresh smell for a long time. The kids crawl on a clean carpet and they are not afraid for them. There is no dirt from animals or microbes in the pile.

Use a paper towel or napkin to remove any remaining moisture from the carpet.
Spray the stain with the spray and lightly rub it in with a sponge until the stain disappears.
After 5 minutes, remove the residue with a vacuum cleaner.

The spray works quickly. The surfactants in its composition dissolve fats and proteins, remove oily contaminants and traces of organic compounds.

Old stains should be lightly moistened with a sponge, blot off excess moisture and spray the stain with a spray. If you can't clean completely, use wet powder or repeat cleaning after a few hours.

If the carpet is not vacuumed before removing the old stain, dust stains may remain on the surface.

Removing stains

Although vanish is a universal product for cleaning furniture, in different situations it is better to use different types of products and methods. It all depends on the type of contamination, the size of the stain and the time of its appearance. These parameters affect how the surface is pre-prepared and the cleaning agent is applied.

Grease stain

If something greasy has dripped onto the upholstery of furniture, the first thing to do is sprinkle the stained area with salt. The main thing is to prevent oil from penetrating deep into the fabric and filler. Otherwise, the stain will be more difficult to remove. To remove grease stains, use Vanish spray. Spray on the stained area, apply a cloth, iron with an iron without steam.

If neither salt nor starch was on hand in time, and the oil penetrated deeply, then you need to make a paste from the powder and apply it for 3-5 minutes. For old grease stains, use a hand-applied antibacterial shampoo. Rub with a sponge soaked in shampoo until they disappear. Wash off any remaining product on the upholstery with plain water.

Take the spray

Apply to upholstery

After a couple of minutes, wipe with a dry cloth

Milk stain

When removing milk stains, keep in mind that milk is a dangerous substance for upholstered furniture. Milk is a fertile environment for all kinds of bacteria and microorganisms. As a cleaning agent, use antibacterial shampoo or vanish for washing vacuum cleaners. In addition to chemical treatment, the furniture must be dried. If you have a washing vacuum cleaner, the liquid can be sucked out with it. The faster the furniture dries, the less risk that the upholstery and filling will begin to rot. If the sofa has been drying for a long time, an unpleasant odor appears - repeat the chemical treatment.

Wine stain

Wine stains are not easy to remove. Moreover, not only red, but also white wine can leave a bright mark. The stains will not be as intense, but will still ruin the look. If it is not always possible to remove wine stains from an ordinary tablecloth, then what can we say about upholstered furniture. To remove wine stains, do the following:

Remove any wine that has not yet been absorbed using a napkin, blotting and rubbing the stained area;
Pour salt on top of it so that it absorbs the remaining liquid and leave for 10-15 minutes;
Brush off the salt and wipe with a napkin;
Apply Vanish shampoo and scrub with a sponge.

Check after a few hours to see if the stains have disappeared or not. If unsuccessful, wash the area of contamination with vanish again.

Wiping off the wine

Add salt

Removing salt

Apply spray or shampoo

Coffee stain

Such stains are difficult to remove, especially if it was freshly brewed coffee. In addition to pigment, it contains small particles of ground grains that get stuck in the fibers of the fabric. But Vanish copes with such stains easily. Apply Vanish shampoo foam to the stained area for a few minutes and wipe off with a cloth. If the stain is old, rub again with a sponge soaked in a water solution of Vanish shampoo.

Fruit stain

This type of stain also includes stains from fruit jam and puree. To remove them, an aqueous solution of ammonia was previously used. But it took a long time to rub. As a result, the fabric looked wrinkled and sloppy. With vanish, cleaning occurs without much physical effort. The structure and appearance of the fabric are preserved. It remains like new for a long time.

Marker and ballpoint pen marks

Vanish spray is suitable for removing marks. Ink from a marker and ballpoint pen does not penetrate deep into the fabric, but removing such stains is not easy. It's all about the chemical composition of the coloring pigment. Apply the spray to the upholstery and wipe with a dry cloth. If there is no spray, rub with a sponge soaked in a water solution of vanish.

Apply spray

After a few minutes, wipe with a cloth

Blood

If blood gets on the upholstery, the first thing to do is wipe the area with a cloth soaked in cold water with a small amount of vanish. Fresh stains are easier to remove. But it can also handle old, dried marks. Dilute the powder in water to a paste and apply to the soiled fabric. After 4-5 minutes, remove the slurry and rinse the upholstery fabric with water.

Using vanish as a cleaning agent for upholstered furniture will help maintain its original appearance. For a better understanding of how powder and shampoo are diluted and how cleaning is carried out at home, watch the video here.

Aerosol "Active foam" for fresh stains

The aerosol is designed to remove fresh stains from the surface of the carpet. Excess moisture and grease should be collected with a dry cloth, first blotting and then wiping the stain. To apply the foam evenly, the can must first be shaken several times. Then spray the foam onto the dirt from a distance of 70 - 80 cm, this is approximately holding it at waist level.

The foam dries quickly and after 3 – 5 minutes it can be removed with a brush, or even better, with a vacuum cleaner. If the stain is difficult to remove, then you can rub the treated area with a soft brush, directing the foam inward in a circular motion, between the villi. Everything must be done quickly, before the substance dries.

The dried stain must first be lubricated with a shampoo solution prepared in the same proportion as for whipping foam. Then spray the aerosol.

Precautionary measures

When working with Vanish detergents and cleaning compounds, you must remember safety. Dirt is removed by surfactants contained in large quantities - surfactants. They dry hands, irritate the mucous membrane when a person inhales them, and cause allergies, especially in children. It is necessary to ventilate the room where the carpet is being cleaned well and wear rubber gloves. While the carpet is drying, no one should be in the room.

If you have a carpet on the floor of your apartment, then you know firsthand that caring for it requires patience, strength and the use of special detergents. Many housewives successfully remove stains using Vanish for carpet cleaning. This is a universal cleaner that can remove almost any stain. However, not everyone knows how to use it, so you can find negative reviews about Vanish on the Internet. We invite you to study the varieties and detailed instructions for using this unique product.

Why clients choose Russian Cleaning

Our company employs 15 experienced cleaning specialists. For each client, we develop an individual cleaning program and go to the site at a time convenient for the customer. The cost of professional dry cleaning of sofas starts from 1,500 rubles and varies depending on the cleaning area and the type of upholstered furniture.

We travel to all areas of Moscow and the Moscow region. To remove contaminants, we use highly specialized products that eliminate the risk of damage to products. We have all the necessary certificates confirming the safety of the equipment used in residential premises. We provide a guarantee for all types of services.

Composition and varieties

There are several ways to clean carpets from dirt and stains :

Wet cleaning will cope with difficult stains. Special liquid products will help get rid of stains.
Dry cleaning involves the use of powders that are sprinkled onto carpets. The powder will attract dirt to the surface and it can be easily removed with a vacuum cleaner.

Vanish does not contain chlorine, which can change the color and strength of the product. The effectiveness of Vanisn cleaning product is achieved thanks to the following components:

chemical compounds that are combined with other components and are highly resistant;
organic substances with flower aromas;
phosphates;
acid bleach.

Vanish cleaning product is available in both dry and liquid form:

Spot Cleaning Spray is designed to remove stains.
Dry cleaning powder will help get rid of stubborn stains. Its chemical composition includes active elements that can bring even the most stubborn dirt to the surface. As a result, the carpet takes on a fresh and well-groomed appearance.
Shampoo for manual cleaning can be simple and antibacterial. A product with antibacterial components will not only remove dirt, but also destroy germs.
A special shampoo for washing vacuum cleaners is used to clean dirt and remove odors.
Active foam is designed to remove stubborn dirt, remove stains and freshen carpets.

How to remove silicone sealant from bathroom tiles

All Vanish products have their own characteristics, so they must be used according to certain rules.

How to clean a sofa with Vanish

You can clean the surface of furniture with Vanish both from time to time and regularly. The soft components of the product do not affect the service life of the sofa. However, compliance with cleaning technology plays an important role.

Which Vanish to choose

The product line allows you to return cleanliness and freshness to your home. You should choose the right products based on your own needs. In order to clean the sofa from dirt, it is suitable:

Antibacterial Vanish for carpets. The product forms a thick foam that removes the most difficult stains. Copes well with pronounced unpleasant odors. The advantage of the product is its high antibacterial activity. The product is suitable for pet owners and families with small children.
Shampoo for hand washing. Sold in convenient soft packaging. Allows you to achieve clean and fresh furniture upholstery and carpets without much effort. Available in miniature format.
Active foam Vanish for sofas and carpets. The convenient bottle allows you to spray foam onto the surface without first mixing the product with water. Removes dirt, fights unpleasant odors, and allows you to remove animal hair and hair.
Vanish Gold. Highly effective Vanish for cleaning sofas, carpets and other fleecy fabrics. Removes stubborn dirt, eliminates unpleasant odors, and gets rid of animal hair. Returns brightness to furniture upholstery.
Shampoo for washing vacuum cleaner. If you have a vacuum cleaner in your home, you can restore the freshness of the carpet using the device. The amount of product recommended for cleaning is indicated in the instructions for use of the product.

It is important to know that before cleaning the sofa with Vanish, it is better to treat difficult stains with a stain remover. You can use any available product or purchase a specialized upholstery product from the same manufacturer.

Preparatory stage

Do not apply Vanish for sofas to furniture upholstery without prior preparation. To achieve the best result, you must:

Clean the surface with a vacuum cleaner. A vacuum cleaner allows you to get rid of dust and small debris. It is recommended to use a special furniture attachment. To deep clean the sofa, you need to carry out the procedure at the maximum power of the device.
Cover the sofa with a damp cloth. This is necessary not only to clean the furniture, but also to prevent dust in the room. An old sheet or duvet cover will do. The damp cloth should cover the entire soft surface of the furniture. If there is a pronounced unpleasant odor, the material can be moistened with water and vinegar. You can also moisten the fabric in a soap solution.
Beat it off. The covered sofa must be carefully beaten. The procedure must be carried out with caution. Some fabrics (silk, cambric, velor) may not be resistant to intense impacts. The fabric covering the piece of furniture should be rinsed periodically. You should beat the sofa cover until the fabric on top remains clean.
Wet the surface. If the surface of the furniture is a little dry, it should be slightly moistened. To do this, you can use a spray bottle or a cloth. Applying the product to a damp surface will achieve a more pronounced result.

Cleaning instructions

Almost all of these tools are used in the same way. How to clean a sofa at home with Vanish:

Prepare an active solution. To clean the surface of upholstered furniture, it is recommended to mix shampoo with warm water in a ratio of 1 to 9. Afterwards, the resulting composition must be whipped into foam. The easiest way to do this is with a sponge or brush.
Apply the solution to the sofa. Using a soft sponge, spread the foam over the surface of the upholstered furniture. It is recommended to avoid excessive wetting of the fabric layer. Otherwise, streaks may appear on the upholstery when drying.
Leave the remedy. To easily clean furniture, just 10 minutes is enough. If you need to wash the sofa thoroughly, then leave the product on for 6-8 hours. In severe cases, the period can be extended to a day.
Remove leftovers. At the end of the specified period, the surface of the sofa must be thoroughly vacuumed. It is recommended not to use furniture until the outer material is completely dry.
The product in spray form does not require pre-mixing with water. Shake the bottle carefully, and then apply a thin layer of foam onto the soft upholstery. Leave the product for several minutes or hours, and at the end of the period, vacuum the furniture. If there is severe contamination, use a stain remover for the sofa in advance.

It is important to know that when caring for a soft surface, it is forbidden to use brushes with hard bristles. Also, do not resort to pronounced movements with effort. Such factors can cause damage to furniture.

Carpet cleaning with Vanish at home

When using any of the carpet cleaning products, you must follow these recommendations:

Anti-stain spray

At home, stain remover should be used immediately after staining the carpet. In this case, the fresh stain will be easier to remove. Instructions for use advise:

Vacuum the surface and spray the spray onto the stain.
Dirt can be scrubbed with a soft brush.
After five minutes, use a clean, dry cloth to remove the spray.

Shampoo for manual cleaning

Both regular and antibacterial shampoo will not only clean away dust and dirt, but also remove unpleasant odors

. The sequence of their application is as follows:

Vacuum the carpet.
Dilute shampoo in a bucket or bowl with cool water (1:9).
Lather the cleanser well. It is foam that will be used, so there should be as much of it as possible.
Using a regular sponge, apply foam to the surface (there is no need to wet the carpet).
Once the foam settles and dries, the carpet will need to be vacuumed.

Cleaning suede bags from stains at home

Shampoo for washing vacuum cleaners

At home, the cleaning method using a washing vacuum cleaner and a special Vanish is very effective. Easily and quickly removes ingrained dirt from the coating and unpleasant odors.

Instructions for use:

The use of Vanish shampoo on silk products and handmade coverings is not recommended.

Dry cleaning powder

A powder product can clean large areas, refresh the product and get rid of dried stains. There is no need to dilute the powder with water, which makes it convenient to use.

Cleaning sequence:

Vacuum the carpet.
Shake the bag of powder and spread the product over the surface. To get an even layer, you can use a soft brush.
After about 20 minutes, the powder should dry and it, along with the dirt, will need to be collected with a vacuum cleaner. To collect all the product from the pile, you will need to vacuum several times.

Cleaning with moistened powder should be done slowly, consistently and strictly according to the instructions. Before use, it is recommended to test the product on a small area of the product.

Active foam

You can clean a heavily soiled carpet, remove old stains on it, or simply refresh the product using special active foam

Vanish. It is applied as follows:

The carpet is being vacuumed.
The container is actively shaken and the foam from it is distributed over the surface. When spraying, the container should be kept at a distance of 70–90 cm from the product.
The foam can take several hours to dry. After this, it will need to be collected with a vacuum cleaner.

How to remove polyurethane foam from plastic, skin of hands and clothes

Like other Vanish products, the foam should not be used on silk items or handmade carpets. The room should be ventilated during the cleaning procedure. Before using any cleaning product, test it on a small area of the coating.

Which Vanish is best for cleaning a sofa?

The choice of means for cleaning certain surfaces is determined by its purpose. Which Vanish is suitable for cleaning a sofa? It depends on the structure of the fabric and the degree of contamination. So, for simple cleaning of fabric furniture, the classic Vanish shampoo is suitable; if it needs to be disinfected, use an antibacterial shampoo, and if you need to remove a stain, use a stain remover. Tip: you can wash covers with universal bleach, and it is better to treat fleecy fabrics with carpet foam or moistened powder.

Shampoo

How to clean a Vanish sofa if you want to finish cleaning faster? Use the product in shampoo format. This is the most convenient option that is suitable for manual use and helps get rid of old stubborn stains. Vanish antibacterial shampoo disinfects fabric, kills bacteria, removes stains and dirt, and eliminates the smell of dampness. Shampoos for washing vacuum cleaners have the following useful properties: they are safe for upholstery of upholstered furniture or carpets, they perfectly refresh paints, and they facilitate the cleaning process without soap. There is no need to scrub off dirt manually, which is also an advantage of the shampoo.

Rice. 2 - Vanish release forms

Stain remover

This type of product comes in spray or powder form. The first is convenient with fast and precise spraying, the second allows you to cope with stains of any complexity. If there is a cover on the sofa, you can also soak it in Vanish stain remover and then put it in the washing machine to achieve perfect cleanliness.

Spray

A stain remover in this format is suitable for quickly cleaning a contaminated area. You can use it on a chair or sofa against stains of sauce, wine, cosmetics, animal hair, vomit, feces, urine, blood, spilled medicines. The aerosol will easily and simply remove any contamination.

Powder

The product is ideal for dry cleaning furniture. It does not require moisture, which saves time and reduces the risk of damage to the upholstery. Apply Vanish powder to the cloth, wait a little and brush off the residue with a brush or use a vacuum cleaner.